ZyWALL Series CLI Reference Guide
463
52.2.1.1 Address Object Command Examples
The following example creates three IPv4 address objects and then deletes one.
The following example shows FQDN command usage.
fqdn-object test fqdn
fqdn
Tests an FQDN object by entering a fully-qualified
domain name.
show fqdn-object all
Displays all FQDN objects with IPv4 addresses configured
on the Zyxel Device.
show fqdn-object6 all
Displays all FQDN objects with IPv6 addresses configured
on the Zyxel Device.
show fqdn
Displays the FQDN host name and domain name
configured on the Zyxel Device.
show fqdn-object query-period
Displays how often (1-5 seconds) the Zyxel Device should
query the DNS server configured on the Zyxel Device to
update FQDN - IP cache entries.
show fqdn-object sync-period
Displays how often (1-5 seconds) the Zyxel Device should
query the DNS server configured on the Zyxel Device to
update FQDN - IP cache entries.
Table 260 address-object and address6-object Commands (continued)
COMMAND DESCRIPTION
Router# configure terminal
Router(config)# address-object A0 192.168.1.1
Router(config)# address-object A1 192.168.1.1-192.168.1.20
Router(config)# address-object A2 192.168.1.0/24
Router(config)# show address-object
Object name Type Address Ref.
=====================================================================
A0 HOST 192.168.1.1 0
A1 RANGE 192.168.1.1-192.168.1.20 0
A2 SUBNET 192.168.1.0/24 0
Router(config)# no address-object A2
Router(config)# show address-object
Object name Type Address Ref.
=====================================================================
A0 HOST 192.168.1.1 0
A1 RANGE 192.168.1.1-192.168.1.20 0
Router# show fqdn
host name : usg110
domain name: none
FQDN : usg110
Router# show fqdn-object query-period
FQDN Object Query Period: 2
Router# show fqdn-object sync-period
FQDN Object Sync Period: 1
Router(config)# fqdn-object test usg110
FQDN: usg110
Address
===========================================================================
127.0.0.1
Router(config)#
To Next Page
Loading...
