Chapter 65 File Manager
ZyWALL Series CLI Reference Guide
558
Figure 55 FTP Firmware Transfer Complete
8 After the transfer is complete, “Firmware received” or “ZLD-current received” displays. Wait (up to four
minutes) while the Zyxel Device recovers the firmware.
Figure 56 Firmware Received and Recovery Started
9 The console session displays “done” when the firmware recovery is complete. Then the Zyxel Device
automatically restarts.
Figure 57 Firmware Recovery Complete and Restart
10 The username prompt displays after the Zyxel Device starts up successfully. The firmware recovery
process is now complete and the Zyxel Device is ready to use.
To Next Page
Loading...
