Chapter 72 Miscellaneous
ZyWALL Series CLI Reference Guide
598
72.2.3.1 Application Watchdog Commands Example
The following example displays the application watchdog configuration and lists the processes that the
application watchdog is monitoring.
app-watch-dog reboot-log
flush
Flushes the reboot log record.
[no] app-watch-dog sys-
reboot
If auto recover fail reaches the maximum retry count, app-watch-dog reboots
the device. The no command turns off system auto reboot.
show app-watch-dog
config
Displays the application watchdog timer settings.
show app-watch-dog
monitor-list
Display the list of applications that the application watchdog is monitoring.
show app-watch-dog
reboot-log
Displays the application watchdog reboot log.
Table 345 app-watchdog Commands
COMMAND DESCRIPTION
To Next Page
Loading...
