ZyXEL Communications ZyWALL 310 - Page 605

Chapter 73 Managed AP Commands
ZyWALL Series CLI Reference Guide
605
• Set the AP’s management IP address to 192.168.1.37 and netmask 255.255.255.0
• Set the AP’s default gateway IP address to 192.168.1.32
• Sets the AP’s management interface to use VLAN ID 2 and send tagged packets
• Specifies the primary and secondary IP addresses of the Zyxel Device (192.168.1.1 and 192.168.1.2) to
which the AP connects.
• Displays the settings it configured
Router# configure terminal
Router(config)# show capwap ap discovery-type
Discovery type : Broadcast
Router(config)# capwap ap vlan ip address 192.168.1.37 255.255.255.0
Router(config)# capwap ap vlan ip gateway 192.168.1.32
Router(config)# capwap ap vlan vlan-id 2 tag
Router(config)# capwap ap ac-ip 192.168.1.1 192.168.1.2
Router(config)# show capwap ap discovery-type
Discovery type : Static AC IP
Router(config)# show capwap ap ac-ip
AC IP: 192.168.1.1 192.168.1.2
Router(config)# exit
Router# show capwap ap info
AC-IP 192.168.1.1
Discovery type Static AC IP
SM-State RUN(8)
msg-buf-usage 0/10 (Usage/Max)
capwap-version 10118
Radio Number 1/4 (Usage/Max)
BSS Number 8/8 (Usage/Max)
IANA ID 037a
Description AP-0013499999FF