Accutome B-Scan Plus - Probe Info; Default Range; Frequency; Gain

96
Accutome B-Scan Plus User Guide
Probe Info
The Probe Info displayed on the New Exam initial Info
Screen is informational only and is determined by the 
Accutome B-Scan Plus probe setup.
Frequency
The Frequency field indicates the frequency of the
signal from the probe through the eye.
Default Range
The Default Range field displays the default depth range
displayed on the screen. The range can be adjusted in
the B-Scan Setup. (See Chapter 4 of this manual.)
Gain
The Gain field displays the gain of the image signal.
Sweep Angle
The Sweep Angle field displays the angle at which the
probe sweeps the eye during imaging.
Serial Number
The Serial Number field displays the serial number of the
connected Accutome B-Scan Plus probe.