Accutome B-Scan Plus - Figure 77 Selecting Physician; Physician

98
Accutome B-Scan Plus User Guide
Physician
In the Physician field you can select the physician for the
Patient Exam by selecting the name from the drop down
list. Physician names are entered in the B-Scan Setup.
(Refer to Chapter 4 of this manual.)
Position the cursor on the small arrow at the right of the
physician field. Left click to open the drop down list.
Position the mouse over the up/down arrows at the right
of the drop down list Click the mouse to move through
stored physicians. Once you see the physician you want
to select, position the mouse cursor over the physician
and left click. The selected physician will fill in the
physician field.
Figure 77 Selecting Physician