Accutome B-Scan Plus - Figure 8 Selecting Facility

27
Getting Started Basic Operation
3. The Patient Name must be entered to proceed to
the next screen. Select the First Name field and
enter the Patient First Name.
4. Use the Tab key, or select the Last Name field and
enter the Patient Last Name.
5. Con
tinue entering all relevant Patient information.
6. If you wish to select a Facility, select one from the
predefined (in B-Scan Setup) Facility drop down
list. 
Position the cursor on the small arrow at the right
of
the facility field. Left click to open the drop down
list. Position the mouse over the up/down arrows
at the right of the drop down list Click the mouse
to move through stored facilities. Once you see the
facility you want to select, position the mouse
cursor over the facility and left click. The selected
facility will fill in the facility field.
Figure 8 Selecting Facility