Accutome B-Scan Plus - Creating Reports; Selecting Patient Exam

177
Printing Images and Reports Creating Reports
Creating
Reports
With the Accutome B-Scan Plus you can create a report
for any patient. The report can contain the following:
 Patient Name
 Physician
 Clinician
 Indication for Scan
 Patient snapshot images
All patient information is saved as part of the patient
record.
Snapshot images of the patient exam are also
saved with the patient record every time you save a
scan frame as a snapshot.
The steps to create a patient report are:
1. Sele
ct the appropriate patient exam (see "Select-
ing Patient Exam" below).
2. Capture all necessary snapshots if not previously
captured (see "Capturing Snapshots" on
page 178).
3. Sele
ct Reports tool (see "Reports Tool" on
page 179).
4. Execute Man
age Reports (see "Executing Manage
Reports" on page 182).
5. Create a New
Report for the active patient (see
"Create a New Report" on page 183).
6. Select the snapshots you would like to place in the
report (see "Selecting Snapshots" on page 185).
7. Print or
save the report (see "Print or Save Report"
on page 187).
Selecting Patient Exam
To select the patient exam:
1. Af
ter launching Accutome B-Scan Plus, select
"Existing Exam". The B-Scan Plus Analyze
Screen will display with the existing exam drop
down list.
2. Scroll throug
h the drop down list until you find the
patient for whom you would like to create a report.
3. Once selected, the patient’s exam will appear on
the screen.