73
Setup Options
System Defaults
When you select "System Defaults" in the Probe Control
area, all probe settings will return to the default settings.
Info On Images
The "Info on Images" selections allow you to choose
what information is displayed on patient images and the
position of the measured data. The options are:
Info to Show
Measured Data Position
Info to Show
The following fields are available to be shown on any
patient image:
Facility
Physician
User
Patient
To have any of the fore mentioned fields display on an
image
click in the checkbox to enable the field. The
default is to show the Facility, Physician and User only.
Measurement Data Position
The Measured Data Position selection determines upon
which side of the screen the measured data will appear;
the left side is the default. To change the position select
either left or right radio button.
To Next Page
Loading...
