53
Setup Sequences
The first view of the new sequence can be changed to
any eye, scanning method, and position that you want by
simply making selections and changing them if
necessary. The selections you can make and edit are
listed below.
Edit Current View Selections
The Accutome B-Scan Plus provides all the tools
necessary to change the sequence scan view. Using the
Edit Current View selections you can change:
Eye - OD/OS
Probe Scanning Method - Axial, Long
(Longitudinal) and Trans (Transverse)
Macula Scan - HMAC (Horizontal Macula),
LMAC (Longitudinal Macula)
Probe Position - Wheel with indicator
representing the hours of the clock and
position that the probe should be placed on the
eye for the active scan. Change position by
dragging the indicator.
*Note: OD.Scan, a free scan of the right eye, is the default
given to the first scan of any new sequence. If you
do not want this as your first scan, edit the scan.
To Next Page
Loading...
