139
Patient Image Analysis Analyze Screen
Editing Current View Info
When you click "Edit" in the Current View area the B-
Scan Plus changes the currently active imaging
sequence step. After you make the adjustments to the
probe orientation or positions by dragging the position
indicator the changes will be reflected in the new name
of the step. For example, you changed the probe
orientation for OD.12AX to Transverse, the new step
name is "OD.12T"
Views to Review
The Views to Review area displays all views in all steps
of the current imaging sequence.
Play Controls
The play controls allow you to play, pause, stop, move
forward and move back through an image scan.
Zoom Controls
The Zoom Controls allow you to zoom in on the image
and then return to the normal size view by clicking
"Reset Zoom". Zoom is explained in greater detail in
Chapter 6, Patient Image Analysis.
TGC Adjustments
TGC (Time Gain Compensation) is an adjustment to
compensate for the strength of the signal through the
eye. The TGC adjustments are:
Near - adjustment for signal near the probe
Mid - adjustment for the middle of signal
Far - adjustment for portion of signal farthest
from probe.
Gamma Adjustments
The Gamma adjustments allow you to adjust the
brightness mapping of the B-Scan image. The
adjustments area contains a drop down list of predefined
gamma settings and gamma indicators for Contrast and
Brightness that can be adjusted by dragging.
To Next Page
Loading...
