118
Accutome B-Scan Plus User Guide
The locators are:
CB - Ciliary Body
O - Ora Serrata
EA - Equator Anterior
E - Equator
EP - Equator Posterior
PE - Posterior Equator
P - Posterior Pole
How to Scan To start and freeze a scan with Accutome B-Scan Plus is
as simple as pressing the start/stop button on the probe
or stepping on the footswitch. Both the probe and the
footswitch can be used for start/stop operation if the
setup is predefined to use both. (See "Start/Stop" on
page 72 of this manual.)
If you are using both the probe and the footswitch for
st
art/stop action, they will each perform the operation
that is the opposite of the last operation executed. For
example, if you start scanning by stepping on the
footswitch and press the trigger button on the probe the
scanning will stop.
Using the Probe Trigger Button
The probe trigger button toggles between start/stop.
When you are scanning and press the button it stops the
scan. If you stopped scanning and press the button, the
B-Scan Plus will proceed to the next step in your scan
sequence, or will add a new scan view.
Using the Footswitch
The Accutome B-Scan Plus footswitch is
interchangeable with the probe trigger button. The
footswitch toggles between start/stop. To start or stop
scanning step on the footswitch.
Once you have completed the first scan the image you
have captured will appear in the image area of the
screen.
To Next Page
Loading...
