119
Performing Exams How to Scan
Scanning with a Predefined Protocol
Figure 90 below shows the first step of a scan completed
using a scan group protocol. After you complete the first
scan and have stopped the probe you should move the
probe to conform to the next scan in the sequence. For
example in Figure 90 below the first scan is labeled
"OD.12AX" and the second scan is labeled "OD.3AX".
Wh
en you finish the first scan you should move the
probe on the patient’s eye from the 12:00 axial slice to
the 3:00 axial slice.
Figure 90 New Exam with Selected Protocol - First Scan Complete
To Next Page
Loading...
