42
Accutome B-Scan Plus User Guide
Duplicate Facilities from Selected
To duplicate a facility’s information:
1. Sele
ct the facility you would like to duplicate from
the "Available Facilities" list.
2. Cli
ck on "Duplicate".
3. A copy of the facility will be displayed in the list of
Available Facilities with "(1)" beside the name. If
you make more than one copy the number will
increment with each copy.
4. Y
ou may change any facility information as
needed.
Set Selected Facility as Default
To set a facility as the default B-Scan operation:
1. Sele
ct the facility you would like to become the
default from the "Available Facilities" list.
2. Cli
ck on "Set Selected as Default".
3. The facility will become the default to appear when
you power up the Accutome B-Scan Plus.
Save
To save all facility information:
1. C
lick on "Save".
2. An "Update Restore Point" dialog will launch. If
you would like to save all changes, and have the
current facilities setup become the data restore
point click "Yes". If you would like to retain the old
data restore point click "No".
Figure 23 Update Restore Point Dialog
To Next Page
Loading...
