21
Getting Started Probe
Probe The Accutome B-Scan Plus probe is an integral
component of the Accutome B-Scan Plus product. The
probe is easily installed by connecting the end of the
cable into the B-Scan’s computer USB port. The marker
at the top of the probe is easily aligned with eye tissues
during scanning and the start/stop button makes
operation simple. Image scanning can also be started or
stopped with the footswitch.
*Note: You cannot acquire image scans with the Accutome
B-Scan Plus product without the Accutome probe.
Figure 2 Accutome B-Scan Plus Probe
To Next Page
Loading...
