4.6.2.3 Disabling NIRI data capture for all scans
Note: This section is not relevant for iTero Element 5D Plus Lite systems.
When patients are scanned, the NIRI data is captured by default. However, you can disable capturing the NIRI
data. In this case, none of the NIRI features will be displayed in the GUI, and NIRI data will not be captured, saved,
or sent.
If required, NIRI capture can also be disabled for a specific scan, as described in Disabling NIRI capture.
To disable NIRI data capture, by default:
1. In the Settings window, tap Rx Settings.
2. In the Rx Settings window, toggle the NIRI Captures option to Disabled.
Figure 66: Rx Settings window – NIRI Captures option enabled
A confirmation message will be displayed notifying NIRI will be disabled, by default, for all future scans.
Figure 67: Disable NIRI confirmation
iTero Element 5D and iTero Element 5D Plus imaging systems User manual
© 2022 Align Technology, Inc. All rights reserved. 73
To Next Page
Loading...