Align Technology iTero Element 5D - Adding New Patients; Figure 79: New Scan Window - Adding a New Patient

l
Clear the patient data from the New Scan window, as described in Clearing the patient details from the New
Scan window
5.3.1 Adding new patients
You can add a new patient while filling in the Rx or at any time before.
To add a new patient:
1.
In the New Scan window, in the Patient area, tap .
Figure 79: New Scan window – adding a new patient
iTero Element 5D and iTero Element 5D Plus imaging systems User manual
© 2022 Align Technology, Inc. All rights reserved. 85