This dialog box contains detailed alarm and error information related to the
DS3 interface. Status is indicated by the use of colored Lamp icons.
Alarms
LOSLOS: Loss of Signal
AISAIS: Alarm Indication Signal
LOFLOF: Loss of Frame
RAIRAI: Remote Alarm Indication
IDLEIDLE: Idle Signal
LSSLSS: Link Status Signal
Errors
BPV ErrorBPV Error: Bipolar Violation error
Pattern errorPattern error: Pattern error
Pattern slipsPattern slips: Pattern slips
Parity errorParity error: Parity error
F-bit errorF-bit error: F-bit error
C-bit errorC-bit error: C-bit error
FEBEFEBE: Far End Block Error
55..66..33..44 AlignmentAlignment
Touching the AlignmentAlignment button in the status area of the Ports SetupPorts Setup screen
displays the status shown below.
To Next Page
Loading...
