TransportTransport
PatternPattern
Pattern Error insertionPattern Error insertion
Displays the results of Transport test. This result appears if 'Transport' check
box is selected in the Test Setup screen.
Allows to change the payload pattern. Cross patternCross pattern check box is the same as
Cross pattern at successive framesCross pattern at successive frames of Payload pattern setting.
This provides the same Error insertion as
Stimuli setup options
in Application
Toolbar.
InsertionInsertion
If selecting ManualManual, error(s) are inserted when you touch the Alarm/ErrorAlarm/Error
InsertInsert icon ( ) button.
Set OffOff to stop the error insertion.
Burst lengthBurst length
If 'Insertion' is set to ManualManual, touch the button and set the number of errors to
insert.
66..22..33..22 IEEE1588v2 LogIEEE1588v2 Log
Touching the IEEE1588v2 LogIEEE1588v2 Log button in the navigation area will display the
screen shown below.
To Next Page
Loading...
