Burst Size
Size Distribution Results Total Frames
Size Dist.
Frame Size
Transmit Results Traffic
Latency Results Latency(ns)
Jitter Results Jitter(ns)
WAN Alarms/Errors Alarms
Errors
WAN G.826 Results MUX
SPE
WAN G.826+G.829
Results
MUX
SPE
WAN M.2101.1(M.2100)
Results
MUX
SPE
SyncE Results SSM Statistics
Alarms
Rx SSM QL
IEEE 1588v2 Results Offset Stat
Offset Variance
Mean Path Delay
PDV
Message Stat
Clock Status Stat.
GPS - Wall clock
PCS Results PCS 10G
PCS 40G/100G
Alignment marker
Lane Skew
802.3ah Results
802.1ag/Y.1731 Results
FEC Results LOFA
Corr.CW, Uncorr. CW
Symbol errors
*: Frequency results appear only when no OTN layer.
For the parameters of the following WAN performance measurements, refer to
"SDH/SONET Performance Measurement Items" in SDH/SONET/PDH/DSn
Applications.
Note that the same results are displayed because Pass/Fail judgement is not
performed.
SPE stands for Synchronous Payload Envelope.
WAN G.826
WAN G.826+G.829
WAN M.2101.1(M.2100)
M.2100 Performance Measurement ItemsM.2100 Performance Measurement Items
This paragraph describes the performance result items. Measurement time
definitions are as below.
To Next Page
Loading...
