Client SignalsClient Signals
Test PatternTest Pattern
Measurement channelMeasurement channel
FEC Encode/DecodeFEC Encode/Decode
OH EditOH Edit
TTI measurementTTI measurement
MSIM DetectionMSIM Detection
Alarm InsertionAlarm Insertion
Error InsertionError Insertion
OTU1f/2f (Client Null)
OTU1f-ODU1f/OPU1f-NULL
OTU2f-ODU2f/OPU2f-NULL
OTU1f/2f (Client FC)
OTU1f-ODU1f/OPU1f-FC1200
OTU2f-ODU2f/OPU2f-FC1200
Client Signals
Refer to Section SDH/SONET, Ethernet, Fibre Channel and CPRI.
PRBS : 2
9
-1, 2
11
-1, 2
15
-1, 2
20
-1, 2
23
-1, 2
29
-1, 2
31
-1 with polarization Normal /
Inverted
User Pattern : 32bits, 2048bits
Dummy (Unused), Copy
Tributary Port and Slot can be configured in ODTU mapping.
RS(255,239) described in ITU-T Rec. G709, No FEC
All OTU, ODU bytes except MFAS and BIP8
TTI, FTFL bytes with multi-frame manner
Condition for detecting TIM can be selected.
TCM measurement On/Off
Expected MSI bytes are set from Tx Data or Received Data.
1111..55..33..22 OTN StimuliOTN Stimuli
OTL
*
OOF/LOF, OOR/LOR
OTU, ODU
*
LOS, OTU-AIS, OOF/LOF, OOM/LOM, SM-TIM, SM-BIAE, SM-BDI, SM-IAE,
ODU-AIS, ODU-OCI, ODU-LCK, PM-TIM, PM-BDI, FSF, FSD, BSF, BSD,
TCMi-TIM, TCMi-BIAE, TCMi-BDI, TCMi-IAE, TCMi-LTC (i=1-6)
Multiplexed ODU
OOF/LOF, OOM/LOM, ODU-AIS, ODU-OCI, ODU-LCK, PM-TIM, PM-BDI,
FSF, FSD, BSF, BSD
Client
Client-AIS, CSF
Insertion timing
Single, Burst, Alternate, All
*: Available for both of Normal mode and Through mode
OTL
*
MFAS, LLM
OTU, ODU
*
Bitall, FAS, MFAS, SM-BIP8, SM-BEI, PM-BIP8, PM-BEI, TCMi-BIP8, TCMi-
BEI (i=1-6), Uncorrectable Error, Correctable Error
Multiplexed ODU
To Next Page
Loading...
