Anritsu MT1000A - Page 567

Frequency OffsetFrequency Offset
Payload OffsetPayload Offset
Alarm DetectionAlarm Detection
Error DetectionError Detection
FAS, PM-BIP8, PM-BEI
GMP
CRC8, CRC5, Invalid JC1, Invalid JC2,Invalid JC1&JC2
GFP
cHEC, tHEC, Superblock CRC, eHEC, FCS, CMF
Inserted Error bits are editable.
Client
Bit Error
Insertion timing
Single, Burst, Alternate, Rate, Rate (Random for Bitall), All
*: Available for both of Normal mode and Through mode
±50 ppm 1 ppm step
Movement type
AMP
Burst Insertion (Positive(+1), Positive(+2), Negative (-1))
GMP
Offset (ppm)
Offset
AMP
-131 ppm to +83 ppm (Depending on mapping configuration)
0.1 ppm step
GMP
-150 ppm to +150 ppm 0.1 ppm step
1111..55..33..33 OTN MeasurementOTN Measurement
OTL
LOF, OOF, LOR, OOR, ILA/OLA
OTU, ODU
LOS, OTU-AIS, LOF, OOF, LOM, OOM, SM-TIM, SM-BIAE, SM-BDI, SM-IAE,
ODU-AIS,ODU-OCI, ODU-LCK, PM-TIM, PM-BDI, FSF, FSD, BSF, BSD, MSIM,
TCMi-TIM, TCMi-BIAE, TCMi-BDI, TCMi-IAE, TCMi-LTC (i=1-6)
Multiplexed ODU
LOFLOM, OOF, OOM, ODU-AIS,ODU-OCI, ODU-LCK, PM-TIM, PM-BDI,
MSIM
Client
Client-AIS, PLM, CSF, LSS
OTL
FAS, MFAS, LLM
OTU, ODU
FAS, MFAS, SM-BIP8, SM-BEI, FEC Corrected, FEC Uncorrectable, PM-BIP8,
PM-BEI, TCMi-BIP8, TCMi-BEI (i=1-6)
Multiplexed ODU
FAS, MFAS, PM-BIP8, PM-BEI
GFP
cHEC corrected, cHEC uncorrectable, tHEC corrected,
tHEC uncorrectable, CSF Signal, CSF Sync, Invalid GFP Frame,
Superblock CRC, eHEC corrected, eHEC uncorrectable, FCS,
CMF Sync, CMF Signal, SSF, PTI Mismatch, UPI Mismatch
Client
Measurement FunctionalityMeasurement Functionality
567567