AudioCodes 420HD - Page 95

Administrator's Manual 17. Configuring SIP Settings
Version 2.2.8 95 400HD Series IP Phones
Parameter Description
Use SIP Outbound Proxy
[voip/signalling/sip/sip_outbound_proxy/enabled]
Determines whether an outbound SIP proxy
server is used (all SIP messages are sent to
this server as the first hop).
 [0] Disable (default)
 [1] Enable
Outbound Proxy IP Address or Host Name
[voip/signalling/sip/sip_outbound_proxy/addr]
[Only displayed if the 'Use SIP Outbound
Proxy' parameter is enabled.] The IP address
of the outbound proxy. If this parameter is set,
all outgoing messages (including Registration
messages) are sent to this Proxy according to
the Stack behavior. Default: 0.0.0.0.
Outbound Proxy Port
[voip/signalling/sip/sip_outbound_proxy/port]
[Only displayed if the 'Use SIP Outbound
Proxy' parameter is enabled.] The port on
which the outbound proxy listens.
Range: 1024 to 65535. Default: 5060.
Use Redundant Outbound Proxy
voip/signalling/sip/redundant_outband_proxy/enabled
Enable this parameter if you want to operate
with an outbound proxy server that will serve
as a backup if the first goes down.
[0] = Disabled
[1] = Enabled
Default: 0
Redundant Oubound Proxy Address
[voip/signalling/sip/redundant_outbound_
proxy/address]
[Only displayed if the 'Use Redundant
Outbound Proxy' parameter is enabled.]
Defines the IP address of the backup
outbound proxy server. Format:
0.0.0.0
Redundant Outbound Proxy Port
[voip/signalling/sip/redundant_outbound_prox
y/port]
[Only displayed if the 'Use Redundant
Outbound Proxy' parameter is enabled.]
Defines the port of the backup outbound proxy
server. If occupied by other enterprise
devices, you can configure another.
Default = 5060.
Redundant Outbound Proxy Keep Alive Period
[voip/signalling/sip/redundant_outbound_prox
y/keepalive_period]
[Only displayed if the 'Use Redundant
Outbound Proxy' parameter is enabled.]
Defines how often a keep alive signal is sent
by the phone to the redundant outbound
proxy. Default: Every 60 seconds.