6. After confirming access, you can close the MS login page from the web browser and return
to the Avaya CU360 web interface.
Related links
Avaya CU360 calendar with modern authentication (OAuth) on page 29
Configuring Avaya Room Camera RC100 as IP camera for
Avaya CU360
About this task
You can use Avaya Room Camera RC100 as an IP camera on Avaya CU360.
Avaya CU360 does not support audio when using Avaya Room Camera RC100 as an IP camera.
Use the
Avaya Room Camera RC100 remote control to manage audio and control the camera.
Avaya CU360 application supports Avaya Room Camera RC100 as an additional IP camera
connected through RTSP. Use the IP camera with a maximum resolution of 1080p for live video.
Before you begin
• Connect one side of the ethernet cable to the Avaya Room Camera RC100 LAN port and the
other side to your IP Network.
• Connect the power supply plug to the DC IN 12V port of the Avaya Room Camera RC100
and turn on the Avaya CU360 endpoint.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After you enter the PIN, Avaya CU360
displays the Advanced window.
3. Click I/O Connections > Cameras > IP.
4. Configure the following fields:
• Enable: Select Yes to enable the IP camera.
• URL: Enter the IP address of the Avaya Room Camera RC100. The format of the URL
depends on the IP camera model.
For example: rtsp://[username:password@]camera_ip_address[:port]/filename.
For Avaya Room Camera RC100, the default username is admin, default password is
empty: rtsp://admin:@x.y.z.w/ch1
Initial administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 102
Comments on this document? infodev@avaya.com
To Next Page
Loading...
