Avaya CU360 - Spaces Integration and Automation; Configure Space Integration in CU360 App

Pairing the controller with the Avaya Cloud Office
™
rooms
using controller application
About this task
You can pair the Avaya Cloud Office
™
room with an Android-based tablet 8" (with Android 8.0 or
higher) or the Avaya Vantage
™
K175 (with Release 3.1 or higher). The suggested usage is with
Avaya Vantage
™
K175.
Before you begin
On Avaya Vantage
™
K175, the controller application is preinstalled if the Vantage is bundled in
your ACO offer.
Install or upgrade the controller (Vantage K175 or tablet) to Avaya Cloud Office
™
for Rooms App
version 22.3.30 (72), or higher.
Procedure
1. Open the controller application on your Android-based controller.
2. Enter the paring code.
The paring code is available on the CU360 - Avaya Cloud Office
™
rooms page.
3. Log in to the controller Avaya Cloud Office
™
rooms application with a valid account.
4. (Optional) You could also receive an authentication code for your account. To activate the
code:
a. Tap Enter activation code on the Sign in page.
b. Enter the code you received in the email.
c. Tap Done.
Result
The controller displays the Avaya Cloud Office
™
room page.
Next steps
After pairing the controller application, you can do the following actions from the controller:
• Join meetings with a single click from the room calendar
• Mute and enable audio
• Enable and disable camera
• Start and stop sharing content
• Invite participants
• View and manage participants
• Start and stop meeting recording
• Change layouts
• Increase and decrease speaker volume
Pairing the controller with the Avaya Cloud Office
™
rooms using controller application
October 2022 Installing and Administering Avaya Collaboration Unit CU360 59
Comments on this document? infodev@avaya.com