Avaya CU360 - Known Issues

Mapping FQDNs with Microsoft Exchange calendar meetings
About this task
When you map FQDNs of the meeting locations to the number of the virtual room resource,
meeting participants can join meetings directly from the
Avaya CU360 GUI or web interface with
a single click. Avaya CU360 automatically generates the meeting numbers to dial based on the
FQDN mapping.
Each FQDN entry in the list represents a mapping rule between the FQDN of the meeting location
and the number to dial to join the virtual room specified in the meeting location. By default, the
FQDN list contains some FQDNs. You can also add more FQDNs in the list.
Procedure
1. Do one of the following:
• From the endpoint, click Configure > Advanced > Calendar.
• From the web interface, click Administrator Settings > Calendar > General.
2. Click New FQDN.
3. Configure the following settings:
• Meeting FQDN
• Dialing FQDN
• Prefix
• Call Protocol
4. On the web interface, click Save.
New FQDN field descriptions
Name
Description
Meeting FQDN The FQDN in the meeting location.
The meeting location is the virtual room associated with Avaya CU360.
The meeting location is in the https://<Meeting FQDN>/portal/
tenants/default/?ID=<MeetingID> format.
Dialing FQDN The FQDN of the SIP or H.323 server deployed in your Avaya Meetings
Server deployment
• If the Avaya CU360 is registered to a SIP or H.323 server that can
establish calls by adding a prefix to the virtual room number, leave this
field blank.
• If the Avaya CU360is located outside the enterprise network and not
registered to a SIP or H.323 server, enter the domain address specified
after the at (@) symbol in the meeting invitation.
Table continues…
Initial administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 80
Comments on this document? infodev@avaya.com