Avaya CU360 - Restoring the Avaya CU360 default user settings

2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Calls > Preferences > Video Quality.
4. Configure the following fields:
• NetSense
• Flow Control
• TMMBR RFC5104
• Lip-Sync Automatic
• Delay
• Sharpness
• Presentation Sharpness
• Live Video on Presentation
5. On the web interface, click Save.
Restoring the Avaya CU360 default user settings
About this task
This configuration is available only on the Avaya CU360 endpoint.
Procedure
1. Click Configure.
Avaya CU360 displays the Configure window.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Select Utilities > Restore System > Load Default Values.
4. Select Yes to remove all configurations.
Avaya CU360 restores all default values.
Troubleshooting
October 2022 Installing and Administering Avaya Collaboration Unit CU360 220
Comments on this document? infodev@avaya.com