• Implemented with both audio positioning, body detection, and recognition technologies. It can
precisely frame the speakers
• Automatically switch between the close-up image for speakers and the wide-angle image for
all attendees
Application Scenarios
For the right installation, the camera must be set up at a height in a range between 1.4 and 1.8 m
as displayed in the following picture:
Related links
Configuring Avaya Tracking Camera TC220 as USB camera for Avaya CU360 on page 106
Configuring Avaya Tracking Camera TC220 as IP camera for Avaya CU360 on page 104
Avaya CU360 camera automatic tracking
Avaya CU360 uses the camera auto-tracking and face recognition features, based on the AI
method to direct meetings intelligently and focus on active speakers in the conference room.
Avaya CU360 can identify active speakers among a maximum of four people seated in front of the
camera with a field view of 120° in huddle rooms. Avaya CU360 can automatically pan, tilt, and
zoom the camera for the best framing of active speakers.
When Avaya CU360 does not detect audio or a participant in the camera for 20 seconds,
the camera automatically adjusts to the default 1.5x zoom position. If Avaya CU360 detects a
participant in the same position several times, the timeout increases to 2 minutes.
Avaya CU360 detects only faces in front of the camera. If faces are cover by masks Avaya CU360
does not detect them.
The speaker tracking feature does not work if you mute the mic or set the camera to privacy
mode. In this condition, after a few seconds, the camera returnes to the central wide-angle
position. If the participant speaks several times in a row, the camera returns to the central wide-
Avaya CU360 overview
October 2022 Installing and Administering Avaya Collaboration Unit CU360 32
Comments on this document? infodev@avaya.com
To Next Page
Loading...
