Avaya CU360 - Software Upgrade Methods; Upgrade Over the Air (OTA Upgrade) - Interactive Mode

Configuring an H.323 gatekeeper for Avaya CU360
About this task
Manually configure an H.323 gatekeeper or modify the H.323 gatekeeper connection configured
during the initial setup.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Protocols > H.323.
4. Configure the following fields:
Endpoint menu Web interface
E.164 H.323 Name
Use Gatekeeper E.164
Mode Refuse Calls by IP Address
Gatekeeper Address Use Gatekeeper
— Gatekeeper Address Mode
— Gatekeeper Address
— Use H.460
— Re-Registration Interval Time
— Authentication
— Mode
— Gatekeeper ID
— User Name
— Password
5. On the web interface, click Save.
Initial administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 72
Comments on this document? infodev@avaya.com