2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click I/O Connections > Cameras > USB.
4. Select Yes for Enable the camera.
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
Configuring the monitor settings in Avaya CU360
About this task
After you connect the single monitor or dual monitor to the Avaya CU360 endpoint, you can
configure the monitor settings.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click I/O Connections > Monitors > General.
4. Configure the following fields:
• Number of Monitors
• Resolution HD1
• Resolution HD2
• CEC – Select as Source on Incoming Calls
5. On the web interface, click Save.
Configuring the monitor settings in Avaya CU360
October 2022 Installing and Administering Avaya Collaboration Unit CU360 143
Comments on this document? infodev@avaya.com
To Next Page
Loading...
