2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Select Presentation.
• On the endpoint, Avaya CU360 displays the Presentation window.
• On the web interface, Avaya CU360 displays the Presentation - General window.
4. Configure Local Presentation Mode to Automatic.
Result
Avaya CU360 automatically displays shared content on the screen to local participants when the
endpoint is not participating in meetings. The endpoint also displays alerts for incoming calls.
Disabling the Avaya CU360 video
About this task
Configure meetings to start with video disabled.
Procedure
1. Do one of the following:
• From the endpoint, click Configure > Calling.
• From the web interface, click Basic Settings > Call-Answer mode > General.
2. Configure Video Privacy to Yes.
3. On the web interface, click Save.
Configuring meeting recording in Avaya CU360
About this task
Avaya CU360 saves meeting recordings in the MP4 format. The video stream is recorded in the
H.264 format, while the audio stream is recorded in the AAC-LC format.
You can save meeting recordings on a USB device or on the enterprise network. When you
save recordings on a USB device, you can transfer the recordings to an external server, such as
a generic FTP server or
Avaya Meetings Streaming and Recording. To save recordings on the
enterprise network:
• The Avaya Meetings Server deployment must have a recording server.
Disabling the Avaya CU360 video
October 2022 Installing and Administering Avaya Collaboration Unit CU360 65
Comments on this document? infodev@avaya.com
To Next Page
Loading...
