Configuring Avaya CU360 automatically using the quick setup
About this task
Avaya CU360 prompts you to enter the service code that initiates the automatic configuration
using the quick setup.
The administrator must provision Avaya CU360 for automatic configuration and send the service
code to users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Basic Settings.
On the endpoint, Avaya CU360 displays the Configure window.
2. Click Quick Setup.
Avaya CU360 starts the Quick Setup wizard.
3. Click With Multiple Meeting Services > Automatic Setup > You have a service code >
Avaya Meetings code.
Avaya CU360 displays the window to enter the service code.
4. Enter the service code.
You can enter the service code in the following two formats:
• A full 12-digit service code: The first 5 digits identify the Avaya Meetings Management
server, and the subsequent 7 digits identify the Avaya CU360 endpoint.
• A partial 5-digit service code: The first 5 digits identify the Avaya Meetings Management
server, while the subsequent 7 digits can be empty or contain zeros.
Avaya CU360 displays the name of the Avaya CU360 endpoint configuration that matches
the service code.
Result
• If you enter the full 12-digit service code, the Avaya CU360 configuration is complete.
• If you enter a partial 5-digit service code, Avaya Meetings Management displays a red clock
icon against the Avaya CU360 name. The administrator must complete the Avaya CU360
configuration, which is pushed to the endpoint.
Configuring Avaya CU360 automatically for device enrollment
services
About this task
Avaya CU360 prompts you to enter the service code that initiates the automatic configuration
when you start the endpoint for the first time.
Initial setup and connectivity
October 2022 Installing and Administering Avaya Collaboration Unit CU360 46
Comments on this document? infodev@avaya.com
To Next Page
Loading...
