Avaya CU360 - Configuring the Avaya CU360 web proxy for LAN

This configuration is available only on the Avaya CU360 web interface.
Procedure
1. On the web interface, click Customization > Administrator Settings > System.
2. Select Custom Images.
3. Click the plus icon to select an image on your computer.
4. Click Upload.
Result
Avaya CU360 displays the new image as background during the meeting.
Configuring the Avaya CU360 web proxy for LAN
About this task
You can configure Avaya CU360 to set a web proxy server for the ethernet network.
Procedure
1. On the endpoint main menu, click Configure.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Networks > GLAN > IPv4 Addresses.
Avaya CU360 displays the IPv4 Addresses window.
4. Click Proxy.
Avaya CU360 displays the Ethernet window.
5. Click Ethernet Proxy.
Avaya CU360 displays the Ethernet Proxy window.
6. Select one of the following options:
• None
• Manual
• Autoconfig
• If you select Manual, Avaya CU360 displays the Ethernet Proxy Manual window.
• If you select Autoconfig, Avaya CU360 displays the Ethernet Proxy Auto-Config.
Configuring the Avaya CU360 web proxy for LAN
October 2022 Installing and Administering Avaya Collaboration Unit CU360 109
Comments on this document? infodev@avaya.com