Casting your computer display on Avaya CU360 using Wi-
Fi
About this task
Using Wi-Fi Display, you can project the display of a Windows-based computer on Avaya CU360.
You cannot control the computer using the mouse or keyboard connected to Avaya CU360. You
might experience video quality degradation if you start Wi-Fi Display while
Avaya CU360 is active
in a meeting using Wi-Fi.
If the Wi-Fi connectivity is disabled on your Avaya CU360 by license, you cannot use Wi-Fi
Display.
Before you begin
• Ensure that your computer supports Wi-Fi-based display.
• Enable Wi-Fi on your computer and Avaya CU360.
• Connect the computer or mobile device to Avaya CU360 using Wi-Fi or a LAN cable.
Procedure
1. On the Avaya CU360 desktop, click .
Avaya CU360 displays the Android settings.
2. Click Wi-Fi display .
3. On the Windows computer, click the Notifications icon on the task bar.
4. Click Connect .
The computer displays a list of available devices.
5. Click the Avaya CU360 name.
The computer connects Avaya CU360 as an additional display.
6. (Optional) To change the desktop projection mode, in the Notifications icon , click
Project , and select one of the following options:
• PC screen only
• Duplicate
• Extend
• Second screen only
Related links
Avaya CU360 Wi-Fi Display on page 27
Casting your computer display on Avaya CU360 using Wi-Fi
October 2022 Installing and Administering Avaya Collaboration Unit CU360 89
Comments on this document? infodev@avaya.com
To Next Page
Loading...
