Name Description
Gateway The default gateway static IP address.
Avaya CU360 discards local loopback, IPv4
mapped, IPv4 compact, and IPv6 multicast
addresses.
If you do not enter a static IP address, this field
displays the allocated dynamic gateway IP address.
Ignore Redirect Messages The option to enable Avaya CU360 to ignore ICMP
redirect messages.
Generate Destination Unreachable Messages The option to generate an unreachable message if
a packet cannot deliver to its destination other than
network congestion.
Respond Echo Requests The option to send an echo reply message in
response to an echo request.
DAD Transmit Count The option to specify the amount of duplicate
address detection probes to transmit before
acquiring an IPv6 address.
The options are:
• DAD disabled
• 1 Probe Sent
• 2 Probes Sent
• 3 Probes Sent
The default value is 1 Probe Sent.
Auto Flow Labels The option to generate flow labels automatically
based on a flow hash of the IPv6 packet.
Configuring network priority settings in Avaya CU360
About this task
Configure Avaya CU360 to prioritize a specific network connection when Avaya CU360 cannot
determine the network port from the destination address in the call signal.
When Avaya CU360 cannot determine the route of a call by matching the destination address,
Avaya CU360 uses the preferred network port.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
Configuring network priority settings in Avaya CU360
October 2022 Installing and Administering Avaya Collaboration Unit CU360 153
Comments on this document? infodev@avaya.com
To Next Page
Loading...
