Configuring Avaya CU360 automatically
About this task
Avaya CU360 prompts you to enter the service code that initiates the automatic configuration
when you start the endpoint for the first time.
The administrator must provision Avaya CU360 for automatic configuration and send the service
code to users.
Procedure
1. Start Avaya CU360.
Avaya CU360 displays the quick setup wizard.
2. From the list, select your preferred language.
3. (Optional) To configure Wi-Fi, click Wi-Fi, and configure your wireless network settings.
4. Click Next.
5. (Optional) To update the new version, click Install.
• Avaya CU360 displays the System updates status.
• When the installation process is completed, Avaya CU360 restarts automatically.
6. Click With Multiple Meeting Services > Automatic Setup > You have a service code >
Avaya Meetings code.
Avaya CU360 displays the window to enter the service code.
7. Enter the service code.
You can enter the service code in the following two formats:
• A full 12-digit service code: The first 5 digits identify the Avaya Meetings Management
server, and the subsequent 7 digits identify the Avaya CU360 endpoint.
• A partial 5-digit service code: The first 5 digits identify the Avaya Meetings Management
server, while the subsequent 7 digits can be empty or contain zeros.
Avaya CU360 displays the name of the Avaya CU360 endpoint configuration that matches
the service code.
8. Click Next.
Result
• If you enter the full 12-digit service code, the Avaya CU360 configuration is complete.
• If you enter a partial 5-digit service code, Avaya Meetings Management displays a red clock
icon against the Avaya CU360 name. The administrator must complete the Avaya CU360
configuration, which is pushed to the endpoint.
Configuration of Avaya CU360 basic settings
October 2022 Installing and Administering Avaya Collaboration Unit CU360 45
Comments on this document? infodev@avaya.com
To Next Page
Loading...
