Avaya CU360 - Software Management; Software Upgrade; How to Upgrade CU360 to a New Build

Configuring Avaya CU360 to verify before disconnecting
calls
About this task
Configure Avaya CU360 to ask for confirmation before disconnecting calls to prevent accidently
disconnecting calls.
Procedure
1. Do one of the following:
• From the endpoint, click Configure > Calling.
• From the web interface, click Basic Settings > Call-Answer mode > General.
2. Configure Confirm Disconnect to Yes.
3. On the web interface, click Save.
Configuring LAN connectivity for Avaya CU360
About this task
Manually configure LAN or modify the LAN connection configured during the initial setup.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. Click Networks > GLAN.
3. Configure the following fields:
Endpoint menu Web interface
IP Address Mode Automatic IP Address
IP Address IP Address
Subnet Mask Subnet Mask
Gateway Gateway IP Address
DNS DNS Server IP Address
4. On the web interface, click Save.
Configuring Avaya CU360 to verify before disconnecting calls
October 2022 Installing and Administering Avaya Collaboration Unit CU360 71
Comments on this document? infodev@avaya.com