Avaya CU360 - Advanced Calling Options field descriptions; Configuring Avaya CU360 to automatically share content

Advanced Calling Options field descriptions
Name Description
Call Protocol The protocol to use in calls.
The options are:
• H.323: The protocol for calls to H.323–based
endpoints, such as Avaya endpoints, and for
meetings that are hosted on Avaya Scopia
®
Elite
6000 MCU and Avaya Meetings Media Server.
• SIP: The protocol for calls to SIP-based
endpoints.
Call Type The type of the call.
The options are:
• Audio-Video
• Audio-Only
Call Rate (Kbps) The specific bandwidth to use for calls.
This field is optional. If you do not configure a
specific bandwidth to use, Avaya CU360 uses the
maximum available bandwidth.
Configuring Avaya CU360 to automatically share content
About this task
Configure Avaya CU360 to automatically share content when you connect your computer with
Avaya CU360 using Avaya Screen Link.
Before you begin
Your computer:
• Must have Avaya Workplace Client installed.
• Must be connected to the same network as Avaya CU360. If your computer and Avaya
CU360 are connected to different networks, NAT or a firewall must not be configured
between the two networks.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
On the endpoint menu, Avaya CU360 displays the Configure window.
Initial administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 64
Comments on this document? infodev@avaya.com