Avaya CU360 - Configuring LAN for IPv6 address settings in Avaya CU360

Name Description
IP Address The static IPv4 network address for Avaya CU360.
If you do not enter a static IP address, this field
displays the allocated dynamic IP address.
Subnet Mask The subnet mask associated with the static IP
address.
If you use dynamic IP addresses, this field displays
the allocated subnet mask.
Gateway The default gateway static IP address.
If you do not enter a static IP address, this field
displays the allocated dynamic gateway IP address.
DNS The DNS server IP address.
If you do not enter a static IP address, this field
displays the allocated dynamic DNS server IP
address.
Configuring LAN for IPv6 address settings in Avaya CU360
About this task
After you save the settings on Avaya CU360 web interface, you must log in to Avaya CU360 web
interface again.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click Networks > GLAN > IPv6.
• On the endpoint menu, Avaya CU360 displays the IPv6 window.
• On the web interface menu, Avaya CU360 displays the GLAN - IPv6 window.
Configuring LAN for IPv6 address settings in Avaya CU360
October 2022 Installing and Administering Avaya Collaboration Unit CU360 151
Comments on this document? infodev@avaya.com