Avaya CU360 - Configuring calling number in Avaya CU360

Name Description
Unprotected Calls The option to specify the policy for unprotected calls.
Select the policy to apply when a remote endpoint does not support
protected calls:
• Disconnect: Automatically disconnects the call.
• Ask Conformation: Asks permission to accept the unprotected call.
• Inform: Displays a warning message on the endpoint and web
interface.
• Show status: Displays a notification message on the endpoint and web
interface.
Length of AES key The length of the AES key.
The options are:
• 128, 256 bits
• 128 bits
• 256 bits
Minimum Key Size for DH The minimum key size for the Diffie-Hellman encryption.
The options are:
• Very High Security (2048): Accepts 2048 bits and larger key sizes.
• High Security (1024): Accepts 1024 bits and larger key sizes.
SIP Proprietary Encryption The option to use the encryption for SIP calls.
The options are:
• Yes
• No
Audio Alert An audio jingle for the encryption status of the call or the meeting.
Configuring calling number in Avaya CU360
About this task
Configure a number to call automatically by pressing . You can also specify the call protocol.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
Advance administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 136
Comments on this document? infodev@avaya.com