Avaya CU360 - HD1 port field descriptions

If your administrator configures a PIN to access the advanced settings on the endpoint,
Avaya CU360 prompts you to enter the PIN. After entering the PIN, Avaya CU360 displays
the Advanced window.
3. Click I/O Connections > Cameras > HD1.
4. Select Yes for Enable the camera.
You cannot disable Default Camera.
5. Configure the following fields:
• Control Camera
• Tracking
• White Balance Mode
• Exposure Compensation
6. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
HD1 port field descriptions
Name
Description
Control Camera The option to control the digital pan, tilt, and zoom functions of the
camera.
Tracking The option to focus on the active speaker or auto framing in the room.
White Balance Mode The option to adjust the white balance of the camera to control color tint
in the room.
The options are:
• Automatic: Automatically determine any color tint and adjust colors to
compensate.
• Indoor: Sets the color compensation for artificial light.
• Outdoor: Set the color compensation for natural sunlight.
• Fluorescent Light: Reflects more green color wash than the
conventional colors.
Exposure Compensation for
end points
The option to enable the camera to compensate the exposure level
manually, when the camera image is too bright or dark.
Exposure Level for web
interface
The option to enable the camera to compensate the exposure level
manually, when the camera image is too bright or dark.
Advance administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 140
Comments on this document? infodev@avaya.com