3. Do one of the following:
• On the web interface, click System > LDAP > Add Server.
• On the endpoint menu, click System > LDAP > Add.
4. Configure the following settings:
• Type
• Preferred
• Address
• Port
• User: This option is available only on the Equinox Management, Cloud, and Remote
H.350 (generic) servers.
• Password
• Base: This option is available only on the Remote H.350 (generic) server.
• RootDN: This option is available only on the Equinox Management, Cloud, and
Remote H.350 (generic) servers.
• Filter: This option is available only on the Remote H.350 (generic) server.
5. On the web interface, click Save.
Related links
Enabling the Avaya CU360 advanced settings on page 62
Advance administration
October 2022 Installing and Administering Avaya Collaboration Unit CU360 120
Comments on this document? infodev@avaya.com
To Next Page
Loading...
