Parameter Description
Motor Vehicle Detection
Select
Motor Vehicle Detection
and then check the box to
enable this function.
Non-motor Vehicle
Detection
Select
Non-motor Vehicle Detection
and then check the box to
enable this function.
Step 3 Click
Apply
.
1.7.2.6 Crowd Distribution
Connecting to the front-end device that supports crowd distribution function, system can
support the crowd distribution function. It supports crowd distribution event subscription and
receive. It supports crowd distribution global and regional density settings, linkage alarm and
triggered video storage, or upload the data to the platform. After connecting to the general
network camera, the system adopts the algorithm to analyze the crowd density and trigger the
corresponding actions.
Step 1 Select
Main Menu
>
AI
>
Parameters
>
Crowd Distribution
.
The
Crowd Distribution
interface is displayed. See Figure 4-160.
Figure 4-160
Step 2 Configure parameters. See Table 4-46.
Table 4-46
Parameter Description
Channel Select a channel from the dropdown list.
Enable Check the box to enable the function.
Global Check the box to enable global crowd distribution alarm.
Crowd Density
Configure the alarm threshold. The default setup is 4 persons/
㎡
.
The value ranges from 2 to 10.
Copyright © NSS Sp. z o.o.
147 User‘s Manual
To Next Page
Loading...
General