1.10.4.4.3 Uboot Upgrading
● Under the root directory in the USB storage device, there must be "u-boot.bin.img" file and
"update.img" file saved, and the USB storage device must be in FAT32 format.
● Make sure the USB storage device is inserted; otherwise the upgrading cannot be
performed.
When starting the Device, the system automatically check whether there is a USB storage
device connected and any upgrade file, and if yes and the check result of the upgrade file is
correct, the system will upgrade automatically. The Uboot upgrade can avoid the situation that
you have to upgrade through +TFTP when the Device is halted.
1.11 Network
You can set NVR network parameters so that the NVR can communicate with devices in the
same LAN.
1.11.1 TCP/IP
Select
Main Menu
>
NETWORK
>
TCP/IP
, the
TCP/IP
interface is displayed. See Figure
4-222.
Copyright © NSS Sp. z o.o.
User‘s Manual 214
To Next Page
Loading...