1.1.4 Quick Settings
After you successfully initialized the device, it goes to startup wizard. Here you can quickly
configure your device. Click
Next
, device goes to
General
interface.
The startup wizard interface only displays after you first login the device and have set the admin
password. See Figure 4-16.
Figure 4-16 Startup wizard
● If you select the
Auto Check for Updates
check box, the system will notify you
automatically when updates are available.
● After the auto-check function is enabled, to notify you to update timely, the system will
collect the information such as IP address, device name, firmware version, and device serial
number. The collected information is only used to verify the legality of the Device and push
upgrade notices.
● If you cancel the
Auto Check for Updates
check box, the system will not perform automatic
checks.
1.1.4.1 General
You can set NVR basic information such as system date, holiday and etc. You can also
configure general settings by selecting
Main Menu
>
SYSTEM
>
General
.
1.1.4.1.1 General
You can set device basic information such as device name, serial number.
Step 1 Click
Next
.
The
Basic
interface is displayed. See Figure 4-17.
Copyright © NSS Sp. z o.o.
User‘s Manual 14
To Next Page
Loading...
General