Figure 4-194
Step 2 To configure the settings for the tampering detection parameters, see "1.8.5.1 Motion
Detection".
The Tampering function does not have region and sensitivity items.
Step 3 Click
Apply
to complete the settings.
● Click
Default
to restore the default setting.
● Click
Copy to
, in the
Copy to
dialog box, select the additional channel(s) that you
want to copy the motion detection settings to, and then click
Apply
.
1.8.5.3 Video Loss
When the video loss occurs, the system activates the alarm.
Step 1 Select
Main Menu
>
ALARM
>
Video Detection
>
Video Loss
.
The
Video Loss
interface is displayed. See Figure 4-195.
Copyright © NSS Sp. z o.o.
User‘s Manual 184
To Next Page
Loading...
General