Figure 4-269
Step 2 Select the Ethernet card you want to certify.
Step 3 Select
Enable
and configure parameters. See Table 4-85.
Table 4-85 802.1x parameters
Parameter Description
Authentication
● PEAP: protected EAP protocol.
● TLS: Transport Layer Security. Provide privacy and data
integrity between two communications application programs.
CA Certificate
Enable it and click
Browse
to import CA certificate from flash
drive. For details about importing and creating a certificate, see
"4.14.4 CA Certificate".
Username The username shall be authorized at server.
Password Password of the corresponding username.
Step 4 Click
Apply
to complete the settings.
1.14.2.3 HTTPS
We recommend that you enable HTTPS function to enhance system security.
Step 1 Select
Main Menu
>
SECURITY
>
System Service
>
HTTPS
.
The
HTTPS
interface is displayed. See Figure 4-270.
Copyright © NSS Sp. z o.o.
User‘s Manual 260
To Next Page
Loading...