Parameter Description
Voice Prompts
Check the box and then select the corresponding audio file from the
dropdown list. System plays the audio file when the alarm occurs.
Refer to "1.17.1 File Management" to add audio file first.
Buzzer Select the check box to activate the buzzer when an alarm occurs.
Step 5 Click
Apply
.
1.7.2.10 SMD
You can use SMD (Smart Motion Detection) to detect human and vehicle in the video, and sore
the detection result in structured storage for fast retrieval.
Step 1 Select
Main Menu
>
AI
>
Parameter
>
SMD
.
Figure 4-166
Step 2 Select and enable a channel, and then configure parameters.
Table 4-51
Parameter Description
Sensitivity
The higher the value is, the easier it is to trigger an alarm. But at
the same time, the false alarm may occur. The default value is
recommended.
Effective Target Choose human or vehicle or both.
Schedule
Configure the period and in the set time range, the corresponding
configuration item will be linked to start the alarm.
Anti-Dither
Indicates the time taken from the end of motion detection to the
end of alarm linkage action. The range is 0 to 600 seconds.
Copyright © NSS Sp. z o.o.
157 User‘s Manual
To Next Page
Loading...
General