Parameter Description
Encrypt
If the remote device is added through Onvif protocol, selecting
the
Encrypt
check box will provide encryption protection to the
data being transmitted.
To use this function, the HTTPS function should be enabled for
the remote IP camera.
3. Click
OK
.
The remote device information is displayed on the
Added Device
list.
Step 3 Click
Next
to complete the remote device registration.
Click to change the remote device information. Click to delete remote device.
Once the multiple-sensor device has registered to the device system displays the
channel status on the Link info. See Figure 4-31. It shows one remote device has
occupied two channels: D1, D3.
Figure 4-31
1.1.4.5 RAID Manager
RAID (redundant array of independent disks) is a data storage virtualization technology that
combines multiple physical HDD components into a single logical unit for the purposes of data
redundancy, performance improvement, or both.
RAID function is for some series product only. Slight difference may be found on the user
interface.
Step 1 Select
Main Menu
>
STORAGE
>
RAID
>
RAID
.
Step 2 The
RAID
interface is displayed. See Figure 4-32.
Copyright © NSS Sp. z o.o.
User‘s Manual 30
To Next Page
Loading...
General