BCS Line User Manual

241
Figure 4-246
Step 2 Select a channel and set the values of record duration, bit rate and storage capacity of
picture.
Step 3 Click
Apply
.
1.12.7 Disk Check
The HDD detect function is to detect HDD current status so that you can clearly understand the
HDD performance and replace the malfunction HDD.
There are two detect types:
● Quick detect is to detect via the universal system files. System can quickly complete the
HDD scan. If you want to use this function, make sure the HDD is in use now. If the HDD is
removed from other device, make sure the HDD once storage the record files when installed
on current device.
● Global detect adopts Windows mode to scan. It may take a long time and may affect the
HDD that is recording.
1.12.7.1 Manual Check
Step 1 Select
Main Menu
>
STORAGE
>
Disk Check
>
Manual Check
.
The
Manual Check
interface is displayed. See Figure 4-247.
Copyright © NSS Sp. z o.o.
241 User‘s Manual

BCS Line Specifications

General

Brand	BCS
Model	Line
Category	DVR
Language	English